Edit Content

Impervious Reflective Heat Insulation Coat

$14.00

Introduction

Description

Product Introduction : Impervious reflective heat insulation coating integrates three heat insulation mechanisms of reflection, radiation
and barrier, efficiently reflects sunlight and heat, prevents the sun’s heat from accumulating on the surface of the object, and at the same time radiates the heat on the surface of the object into space In order to reduce the temperature of the object, the low thermal conductivity material is introduced into the coating to block the transfer of heat energy and block the conduction of external heat to the inside of the object. The three functions together achieve a significant heat
insulation and cooling effect.

 

Product Features : 

  1. Heat insulation and cooling, anti-corrosion and waterproof three effects in one
  2. The effect is remarkable, the internal space is cooled by 5-12°C,
  3. Acid and alkali resistance, UV resistance, anti-aging, durable for more than ten years
  4. The lotus leaf has hydrophobic function, water resistance and anti-fouling, water-based environmental protection, low cost, and no maintenance cost.

 

Technical Parameters : 

Product
Impervious Reflective Heat Insulation Coat
Near Infrared Light Reflectance Ratio 0.9
Hemispherical Emissivity (White) 0.88
Aging resistance
1000h without blistering, peeling and cracking
Adhesion (cross-cut method) level 1
Salt spray resistance
1200 Hours no exception
Coverage Good
Indoor temperature drop 5-12℃

Packaging Size : 18kg

 

Scope of application : Metal roofs, steel structure workshops, building exterior walls, cement roofs, metal petrochemical storage tanks, mobile base stations, grain storage tanks, farm containers, and other places that require heat insulation, cooling, waterproof, anti-corrosion, and energy-saving integration

 

Application Method :

  1. The temperature of the applied environment should be above the dew point: 5°C-80°C, the humidity below 85%, and it is not possible to construct in rainy or snowy days outdoors;
  2. Remove dust, dirt and sundries on the surface of the substrate before construction, and keep the working surface dry;
  3. Use the cross roller coating method or cross spraying method to carry out continuous construction on the roof color steel tile roof, cement roof, etc., spray twice with an interval of two hours;
  4. The appication of coating is from the top to the bottom of the building. Each spray or roller coating is bounded by the natural grid joints, the junction of Yin and Yang corners or the downpipe for each brushing. Each brushing surface should be completed as much as possible at one time;
  5. During application, the coating is uniform, no bottoming, no sag, and consistent color.
  6. Dosage suggestion: 4-8 square meters per liter twice.

Items to take Note :

  1. Please conduct a small-scale test before use, and use it on a large scale after confirming the performance. To avoid a large
    amount of inhalation, please wear protective equipment and use it in a non-closed environment or in a ventilated place.
  2. If the liquid accidentally enters the eyes, please rinse with clean water for more than 15 minutes, and go to the
    hospital for examination.
  3. If the liquid enters the mouth, please spit it out immediately and go to the hospital for examination.
  4. If the liquid sticks to the skin, please wash it immediately with water and soap.
  5. Storage and transportation:
    This product is water-based coating, non-flammable and non-explosive, safe for transportation, and has a shelf life of 12 months.
    The product should be sealed and stored in a dry and well-ventilated warehouse. The storage temperature should be above 0°C and
    below 40°C. Avoid water immersion, avoid direct sunlight, isolate water sources, and keep away from heat sources.

Related Products

Shopping Cart